Barbieri Spectro LFP RT Series 3

Barbieri Spectro LFP Series 3 Spectrophotometer

What is the Spectro LFP Series 3?

Barbieri Spectro LFP RT Series 3 Measuring Head

With all the new materials that need to be printed now a days it is no wonder there has been so many new printing devices coming into the market. The customer still requires color quality in all these wide variety of medias. In order to apply color management to all types of medias, ICC profiles are a must. Barbieri Electronics has confronted this issue with a product that eliminates discrepancies between medias, the Spectro LFP RT Series 3.

All of the experience and knowledge that was placed into the successful Spectro 100xy and Spectro50xy has been moved into the new Spectro LFP RT. It's an automatic measuring instrument for both transmission and reflection mode to create ICC profiles and is used in modern Color Management for digital output of images.

Reduce the Glare by adding a Polarization Filter to your Spectro LFP Series 3

Barbieri LFP RT Polarization Filter

A polarization filter controls light by blocking out all light except that which is traveling perpendicular to the filter's orientation. This allows the filter to reduce glare off of reflective materials that would otherwise be difficult to measure properly.

The polarization filter is only available for the Spectro LFP Series 3 at this time.

Spectro LFP RT vs Spectro LFP Tex

Product Application

• Creation of ICC profiles for digital output devices for most different materials (both reflective and transparent)
• Single measurements of logo-colors (Pantone) with subsequent check of the color-true printing
• Use as a densitometer to determine density values for films and papers

Spectro LFP Series 3 Features

• Now 30% faster
• Measuring speed of 1200 patches in 10 minutes
• Maximum measurement area of 11.42" W x 7.78" H
• Switch between small and large apertures using software
• Switchable aperture size from 2mm to 6mm
• Maximum target thickness of 20mm
• 3 reading modes:
  • 1. Automatic measurements
  • 2. Single measurements
  • 3. Density measurements
• The following materials printed on large format inkjet-printers can be measured automatic: papers, vinyl, textiles, cardboards, plastic plates, gypsum plates, wood, glass, stone and ceramics plates.
• Able to measure heavy and thick materials (up to 20mm)
• To measure spectral and density values
• For reflective and transparent media
• Measuring aperture adjustable from 2mm to 6mm
• Supported by most RIP and Profiling Software
• High quality electronic components and modern assembling system
• Robust transport unit
• Compatible for Macintosh and PC
• Extremely high measuring precision and repeatability
• Creates high quality ICC profiles

Includes

• 2 sample holders (reflection and transmission)
• Profile-Xpert Gateway Software