Shipping Quote

Destination

Enter destination to get a shipping cost

Shipping Rates

EIZO ColorEdge CG277 27" LCD Monitor

(CG277-BK)

1051

 


List Price: $2,499.00
Add Items to Cart
Free Shipping from RPimaging

SHIPPING STARTING at $12.99 Calculate Shipping


Buy from RPimaging an Eizo Authorized Dealer

Automate your calibration and spend your work hours working.EIZO CG277 LED brings (2560 x 1440) resolution with 27.0" screen for use in photography, design, print, and post production . It cuts down the monitor display warm up time to mere 7 minutes. This next-gen monitor reproduces 99% of Adobe RGB for color accuracy and utilizes DUE equalizer technology to remain color temperature uniformity on the entire screen.

  • In-Plane Switching (IPS) Technology
  • DisplayPort x1 / HDMI x1 / DVI-D x1
  • (2560 x 1440) resolution (16:9 aspect ratio)
  • 300 cd/m2 Brightness
  • 1000:1 Contrast Ratio
  • 178°/178° Viewing Angles
  • 6ms Response Time
  • 1.07 Billion colors
  • 2x USB 2.0 Ports
  •  

Description


 

Built-In SelfCalibration Sensor

 

Built-In Calibration Sensor

Eizo CG277 internal color measurement The EIZO CG277W features a built-in sensor that is housed within the monitor’s bottom bezel and swings up onto the screen when calibration begins. This sensor eliminates the need for a third-party calibration device and even operates in portrait mode.

 

Self-Calibrating Monitor

Using either the OSD menu or the bundled ColorNavigator software, you can schedule the ColorEdge CG277 to self-calibrate at specific times. Reassuringly, even if the monitor is switched off or not even connected to a computer, it will stick to its preset schedule and self-calibrate.

 

Eizo CG277 self calibrating
OS-Independent Calibration

Since the PC itself is not necessary for self-calibration, the ability to calibrate the monitor is not dependent on using an operating system supported by the ColorNavigator software. Therefore, a calibrated ColorEdge CG277 can be used with Linux even though ColorNavigator currently does not support this OS.

 

Correlation with Other Sensors

The ColorEdge CG277 can be correlated to the measurement results of an external calibration sensor. This is convenient if the ColorEdge CG277 is used in a work environment with other ColorEdge monitors and one measurement device must be used as a standard for all calibration. Correlation is done with a new “Correlation Utility” included with the bundled ColorNavigator software.

 

Back To The Top ⇑

 

What’s New with the ColorEdge CG277

 

Simple and Precise Calibration with ColorNavigator

ColorNavigatorThe bundled ColorNavigator software makes calibration both simple and quick. Just input target values for brightness, white point, and gamma.. The built-in sensor directly utilizes the monitor's look-up table and creates an ICC profile within minutes. What's more, you can always download the latest version of ColorNavigator for free here on eizo.com.

 

Wide Color Gamut

Color AreaThe CG277 LED reproduces 99% of the Adobe RGB color space so it can display almost all the colors of a photo in Adobe RGB mode. You'll be able to proof GRACoL and SWOP files confidently with 100% color space inclusion.


Excellent Tone Display in the Dark

Eizo CG277 reduced glare - super blacks

When viewing the screen from an angle in a dimly lit room, dark tones typically appear washed out due to the display characteristics of LCD backlights. The monitor maintains a high contrast ratio even from an angle which allows the dark tones to retain their depth.


Non-Glare IPS Panel

The CG277 IPS (in-plane switching) panel exhibits virtually no glare so several people can view the monitor with minimal color shift.


Eizo CG277 non-glare screen

 

energyConsumption
LED Backlight Cuts Power by 40%

The LED backlight reduces energy consumption by 40% compared to a conventional backlight. It is also mercury-free for less impact on the environment when it is eventually disposed of.

 

 

 

 


Brightness Modulation Minimizes Flicker

To counteract the flicker that is noticeable by some users at low brightness settings, EIZO uses PWM (pulse width modulation) technology. This helps prevent eye fatigue for a more comfortable work environment.

 

Back To The Top ⇑

 

Features for Creative Work

 

Brightness and Color Uniformity with DUE

CG275W uniformity

Standard monitors constantly fall victim to fluctuations in brightness and chromaticity across the screen area. EIZO has incorporated their patented digital uniformity equalizer (DUE) technology to ensure a Delta-E difference of 3 or less across the screen when the monitor leaves the factory. DUE also counterbalances the influences that fluctuating ambient temperature has on color temperature and brightness, which allows you to rest assured you'll see the same color no matter what climate you're in.

 

Stop Waiting For Warm Up

With most standard monitors, there is upwards of a 30 minute wait time before the brightness, chromaticity, and tone characteristics stabilize. EIZO has taken this into account on their new model by shortening this wait time to a mere 7 minutes (more than a 75% reduction). If you're worried about productivity and uptime, and every second counts, then the CG277 is a right fit for you.

 

10-Bit Simultaneous Display

The monitor can display 10-bit color from a 16-bit look-up table via its DisplayPort input*. This is more than 1 billion colors shown simultaneously which is 64 times greater than the 16.7 million colors of 8-bit display. The result is even smoother color gradations and reduced Delta-E between two adjacent colors.

*A graphics board and software which support 10-bit output are also necessary for 10-bit display.

Eizo cg277 10bit display

 

3D LUT for Better Additive Color Mixture

The monitor utilizes a new EIZO-developed 3D LUT. Whereas a typical 1D LUT adjusts color on separate tables for each red, green, and blue, a 3D LUT accomplishes this on a single, mixed-color cubic table. A 3D LUT improves the monitor's additive color mixture (combination of RGB), a key factor in its ability to display neutral gray tones.

 

Factory Adjustment of Gamma
gamma correction

To ensure that each ColorEdge monitor produces the most accurate and consistent color gradations possible, EIZO carefully measures and sets every shade of R, G, and B from 0 – 255 on the production line with the monitor's 16-bit Look-Up Table, to produce a monitor gamma value of 2.2. Should the user prefer a different value, ColorNavigator software can be used to set the gamma value from a range of 1.0 up to 2.6 in increments of 0.1.

 

Back To The Top ⇑

 

ColorNavigator 6

 

Free Software

The bundled ColorNavigator software makes calibration both simple and quick. Just input target values for brightness, white point, and gamma. The built-in sensor directly utilizes the monitor's look-up table and creates an ICC profile within minutes. You can always download the latest version of ColorNavigator for free on eizo.com.

 

Color Matching with Other Monitors

ColorNavigator 6 factors for the different characteristics between ColorEdge monitors and calibration devices to provide accurate results.

cn

 

Import / Export Adjustment Targets

Import and export your post-adjustment target profiles and share the same target values in multiple usage environments.

 

Calibrate Your Monitor to Another Profile

If you want to conduct color management between monitors in a workflow ColorNavigator 6 lets you load the profile of another ColorEdge monitor and use it to calibrate your own.

 

Profile Validation

To verify calibration results or check to see how much the monitor's colors have varied since it was last calibrated, ColorNavigator 6 measures the monitor's color patches to determine the difference between the Delta-E value of the monitor's profile and the actual displayed values of the monitor

c3

 

Back To The Top ⇑

 

ColorNavigator Network

 

Unify Color, Centralize QC Management

With ColorNavigator NX installed on workstations, an administrator can use ColorNavigator Network software to automate quality control (QC) tasks of ColorEdge monitors across an entire studio or between multiple locations. c5

 

Worry-Free Web Hosting

ColorNavigator Network is hosted on a secure cloud server to free you from the initial investment and running costs of providing your own server.

 

Back To The Top ⇑

 

Comfort and Convenience

 

Verification Documents Included

EIZO stands behind the quality of the ColorEdge series by including two verification documents with each monitor. One document verifies the uniformity on 25 points across the screen while the other certifies that all 256 color tones on the gamma curve were individually adjusted at the factory.

 

Multiple Inputs
Eizo CG277 inputs connectors

DisplayPort, HDMI, and DVI-D inputs are included and support resolutions up to 2560 x 1440. The HDMI input also offers direct connection with digital cameras. Two USB upstream ports allow two computers to be connected at once so it’s not necessary to reconnect the USB cable when using the ColorNavigator software and switching between the two computers.

 

Adjustable Stand

Adjust the screen to the most comfortable angle for you and reposition it to show your work to a colleague or client. The monitor comes with a versatile stand that offers height, tilt, and swivel adjustments as well as portrait mode display.

Eizo CG277 stand

 

Ample Screen Sizes for Creative Work

The CG277, CX271, and CS270 give you even more room to work with their spacious 27-inch screens and 2560 × 1440 resolution.

 

Ideal for Moving Image Work

An overdrive circuit is included to reduce Midtone response time to 6 ms and ensure that moving images look clean and sharp with an absolute minimum of blurring and ghosting.

ColorNavigator

 

Shading Hood for Portrait and Landscape Modes

The CG series comes with a unique hood that is designed for both landscape and portrait mode so you can keep the glare off your screen no matter which mode you work in. Shading hood for CG318- 4K and CG248-4K does not support portrait mode. Shading hoods are optional with the CX and CS series.

 

Back To The Top ⇑

 

Ideal for Video Editing and Post Production

 

button guide
LED Buttons and On-Screen Button Guide

For dimly lit work environments, the LED front buttons can be backlit to seven different brightness settings. An on-screen button guide appears above the buttons to indicate what each one is for.

 

1080/24p Playback

Film is usually shot at 24 frames/second and looks unnatural when played back on a typical monitor that displays 60 frames/second. The HDMI input supports a video signal display rate of 1080/24p frames-per-second so you can edit the film as it was meant to be viewed.

 

Range Extension

All ColorEdge models give studio professionals the advantage of using the monitor's entire 10-bit grayscale range to see more detail when doing fine editing work in very dark and very light tones. Setting the screen to show the entire 10-bit grayscale range reveals either 6% or 14% more gray tones from 0 (true black) to 1023 (true white) compared to common broadcast signal display range capabilities.

 

Preset Color Modes

A button on the front of the monitor provides quick access to several broadcast-standard color modes reset color modes: Rec. 709, EBU, SMPTE-C, and DCI. In addition, sRGB and Adobe RGB modes are also available.

 

Back To The Top ⇑

 

Commitment to Quality

 

FograCert Softproof Monitor

The ColorEdge CG277 is recognized by Fogra as a Class A FograCert Softproof Monitor. Using the CG277 in a FograCert Softproofing System ensures designers, print specifiers, and print producers can rely on the soft proof for predictable and consistent results.

 

5-Year Warranty
5 years

The monitor is backed by a manufacturer’s 5-year warranty that covers all components including the LCD panel. EIZO can do this because it manufacturers its products at its own factories. This allows EIZO to keep close control over production quality and ensure that its monitors are built to last for 5 years.

 

 

pixel
Pixel Defect Warranty up to 12 Months

The RGB full pixel failure is zero for up to 12 months after date of purchase based on ISO 9241-307 (pixel failure class I).

 

 

quality
World’s First Color Accuracy (Quick Stability Grade) Certification

This model was among the first monitors in the world to obtain TÜV Rheinland’s Color Accuracy (Quick Stability grade) certification in October 2015. Color Accuracy is the first quality and performance criterion to measure the color accuracy of display devices for multiple graphics fields such as photography, post production, design, and printing.

 

Zero Watts When Turned Off

When the monitor is turned off via the power button on its front bezel it consumes no electricity.

Back To The Top ⇑

 

 

VIDEO: CG277

CG277
Watch Video

 

Specifications

Variant 1
List price $2,499.00
Product Actual Weight 30 lbs
Physical Size (H x D x W) 18 x 11 x 25.5
Computer OS Mac OS 10.8 (Mountain Lion), Mac OS 10.9 (Maverick), Windows 7 (32 bit), Windows 7 (64 bit), Windows 8 (32 bit), Windows 8 (64 bit)
Warranty 5 Year Parts & Labor
Panel Size 27 in
Native Resolution 2560 x 1440
Aspect Ratio 16:9
Pixel Pitch 0.2331 × 0.2331 mm
Contrast Ratio 1000:1
Response Time 6ms
Viewing Angles H: 178°, V: 178°
Brightness 300 cd/m2 (maximum) 120 cd/m2 or less (recommended5)
Connectors DVI-D, HDMI, DisplayPort
D-Sub No
DVI x1
HDMI x1
Features Auto Calibration, Wide Color Gamut, Uniform Brightness
Panel Color Black
Monitor Hood CH5-BK
ICC Version No

Reviews

Customer Reviews

what you see on screen matches exactly color proofs

Quality

Price

Value

this monitor is must for any professional photographic production. especially for small photo post production and photo studios. When calibrating other monitors with separate spectrometers, their are not nearly as spot on as this one. software is very well done and allows to jump from one calibration to another such as for USA printing, magazine, advertising, to European standards. The vertical view is sort of pointless because the screen is very wide and turns into narrow sided/ elongated, though it is cool.

Review by blob-lab (Posted on 11/10/14)

 

Write Your Own Review
You're reviewing: EIZO ColorEdge CG277 27" LCD Monitor
How do you rate this product? *
 

1 star

2 stars

3 stars

4 stars

5 stars

Quality
Price
Value




FAQ

Questions on EIZO ColorEdge CG277 27" LCD Monitor
What do I need to connect the EIZO ColorEdge CG277 to my new Mac Pro? I have the new Mac that looks like a little round cylinder
You will need a mini-displayport to displayport video cable to connect to a Mac Pro. This cable can be found at any computer electronics store.
Do you find this question helpful?  Yes   No

From Stan Jones at 10/16/15 1:33 PM

Ask Your Own Question




You may also be interested in the following product(s)

EIZO ColorEdge CG318-4K 31.1" LCD Monitor

EIZO ColorEdge CG318-4K 31.1" LCD Monitor

(0)
List Price: $5,989.00
EIZO ColorEdge CG248-4K 23.8" LCD Monitor

EIZO ColorEdge CG248-4K 23.8" LCD Monitor

(0)
List Price: $2,829.00
EIZO ColorEdge CG2420 24.1" LCD Monitor

EIZO ColorEdge CG2420 24.1" LCD Monitor

(0)
List Price: $1,599.00
 

Please wait...

 
  Loading...